I’ve been busy thinking up things to make linocuts out of, and don’t know how coherent I’ll be — sorry! 🙂
I did find my old stash of X-Acto blades and blade holders! So I know I don’t need any #11 or #2 blades, and I won’t need an extra handle. There are three types of blades I’ve decided on — the #10 (general, curved) and #12 (detail, curved) for the #1 handle, and the #28 (concave) for the #2 handle. What I will need help with are biomorphic forms (flowers, leaves, feathers), so I’m hoping that the curved blades will assist, here. I think that if I sharpened my initial tools, they should work; but as it is, the only knife or gouge I have that is still reliably sharp is my big U-gouge. And that’s because I didn’t use it in high school. (I don’t know how to sharpen gouges.)
I still haven’t (“still”? it’s been what, a day?) gone back to my original design — though I did get the idea of printing multiple layers of color, today. If I can find a strip of wood that is exactly the height of my linoleum blocks, it would help with registering the prints — that is, lining them up exactly so that I don’t miss and get a weirdly printed copy. I’m not betting on this, though. I do have strips of cardboard that I’ve saved from old drawing pads, which I can cut to size and then tape the print to (while lining up the bottom edge with the block) — I think this should help, but I haven’t tried it yet.
The thing that I still can’t justify buying is a baren. This is largely because they’re expensive, and largely, it’s just a flat surface. The one Japanese brand I’ve found is Yasutomo, and…let’s just say it didn’t feel like anything…special? On the other hand, it was $10 less than the Speedball one. The latter, though, will stand up to Western printmaking papers and doesn’t require oiling, to the best of my knowledge. The Stonehenge paper I’m using is very…tough. I think it’s a cotton rag paper, but it’s really thick and kind of hard.
I’ll probably end up getting the Speedball one; it just kind of hurts a little. 😉 But you buy it like, what, once, and then you don’t have to do it again?
Earlier tonight I was thinking of stocking up on those little tiny 2″x 2″ linoleum blocks; now I’m wondering if it’s overkill. I have the receipt next to me and can see that they cost $0.69 each. So I guess that would be, what…about $3.50 if I got 5 of them? I had been thinking of doing a color rendition, but at the present moment I can’t remember what that version would look like.
It may not be overkill, though, if it will save me a trip. Speaking of which, I did just check — and I’m not sure the little store carries the blades I want. This will then require locating other sources. I should call ahead. I think I have the phone numbers of all my regular art supply stores in a case…aha; found them.
The other irritant I’m facing is how many inks to get. I know I should not go all out and invest in too many at once; on the other hand, this art store is not a convenient place to get to.
Ah, hell. I’ll get a magenta, a blue, yellow, and brown, plus extender (which may be more interesting than diluting colors with white). I have three prints that have come to mind…and this should give me the widest possible color range (even though I have wanted to buy violet and orange). The first print to try or retry is the flower thing that looks like a crocus. Then — I want to try a gingko leaf (3 blocks required), and the idea of a hummingbird has also come to mind…though I should be able to print that with these colors, I now realize!
I’ll just get the three tiny blocks instead of more…the gingko thing and the crocus thing should keep me busy for a while. After that I can practice some more and work on my key block for the hummingbird thing…some time will have elapsed, by then.
It looks like the printing inks are cheaper at the big store, but not by much. The baren is not, and I don’t see how the linoleum blocks could be. Maybe I’ll hit the big box store, get the X-Acto blades and ink, and then hit the small store for the baren and linoleum blocks…and look at their selection of gouges. There are two Speedball kits which contain gouges…I’m thinking of using a very small gouge for the leaf, but am not sure if it will even help, as the veining has to be in reverse in order to print (unless I make the veins lighter than the leaf). The benefit of a gouge here is that it removes material in one swipe, but that’s really suited to later projects (feathers) than either of these two.
And then…do I want to get an X-Acto gouge set instead? I’m pretty sure they exist.
Anyway…I’m now getting tired, and I have a plan now. See you in the morning! I mean after the sun is up!